![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
B&T Angled Foregrip / Hand Stop with NAR Interface
$50.00
B&T angled fore grip / hand stop with NAR interface- color black
(BT-231227-BK)
For those shooters who prefer an angled fore grip, this grip is the perfect solution. The lugs at the end of the grip
assure a firm rest for the supporting hand. The grip can be mounted easily onto the lower NAR/Picatinny rail.
Overall Length: 4.4in
Fixation: Allen Screw For Permanent Mounting
Weight: 74g
Material: Polymer
Color: Black
1 in stock
BT-231227-BK
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 5.5 × 5 × 2 in |
| UPC | 840225703504 |
| MPN | BT-231227-BK |
Related products
-
HSGI COBRA® 1.75″ Rigger Belt Multicam Large
$203.00Sewn with strength and attention to detail, this belt is equipped with the proven quick-release COBRA® buckle and is available with a sewn-in or integrated D-ring. The interior loop fastener is designed to match up with our Sure-Grip® Padded Belts or ABM pouches to lock the belt or pouches into place.
• Constructed with two layers of 1.75″ Type 13 webbing
• Additional rigidity and stiffness are added with a proprietary adhesive before sewing
• Buckle color matches belt (IDR buckle is always black)*Use actual measurements and not pant size when picking your belt size*
Small – 28″-30″
Medium – 32″-34″
Large – 36″-38″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″Covered by HSGI’s® Lifetime Warranty. Made in the USA.
**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
-
KAC SR-15/SR-16 Field Repair Kit
$164.42The SR-15 Field Repair Kit includes the essential components to keep your rifle running over the long term. Also compatible with SR-16 variants.
Field Repair Kit Contents:
(1x) Ejector
(1x) Ejector Roll Pin
(1x) Ejector Spring
(1x) Extractor
(1x) Extractor Pivot Pin
(2x) Extractor Springs, Heavy
(1x) Cam Pin
(1x) Firing Pin
(1x) Firing Pin Retainer Pin
(3x) Gas Rings
-
KAC M4/M5 RAS Hardware Kit
The KAC Medium URX II free floating forend features an integral, flip-up front sight assembly that folds flush with the continuous top rail when not in use, creating a seamless look. Full length mil-spec M1913 Picatinny rails are located at the 3-, 6-, and 9 o’clock positions, making the URX II compatible with any number of rail-mounted tactical accessories. Includes three KAC 11 Rib Rail Panels.
Kit Contents
(1x) Rear Handguard Clamp
(1x) Rear Clamp Screw
(1x) Rear Clamp Screw Retainer
(1x) Rear Clamp Roll Pin
-
KAC Keymod Wire Management Panel Kit, URX 4, Flat Dark Earth (FDE)
$20.11The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.