$5,500.00
Designed for discreet carry, rapid deployment and maximum accuracy, the SPR300 is the ideal tool for specialized sniping missions. Equipped with a state-of- the-art, full-length, integral sound suppressor, the SPR300 emits Hollywood-quiet sound levels of just 121 dB with subsonic ammunition. Precise Swiss engineering allows the rifle to be broken down for transport and quickly reassembled with no perceivable point-of-impact shift.
Quick Specs
Caliber: 300 BLK
Operation: Bolt Action
Mag Capacity: 10rds
Weight: 6.6lbs / 2.9kg w/suppressor
Barrel Length: 9.8 in / 248mm
5 in stock
Weight | 14.5 lbs |
---|---|
Dimensions | 23.5 × 16 × 4 in |
UPC | 1230900000000 |
MPN | BT-SPR300-Pistol kit |
Sewn with strength and attention to detail, this belt is equipped with the proven quick-release COBRA® buckle and is available with a sewn-in or integrated D-ring. The interior loop fastener is designed to match up with our Sure-Grip® Padded Belts or ABM pouches to lock the belt or pouches into place.
• Constructed with two layers of 1.75″ Type 13 webbing
• Additional rigidity and stiffness are added with a proprietary adhesive before sewing
• Buckle color matches belt (IDR buckle is always black)
*Use actual measurements and not pant size when picking your belt size*
Small – 28″-30″
Medium – 32″-34″
Large – 36″-38″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″
Covered by HSGI’s® Lifetime Warranty. Made in the USA.
**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
Trijicon Bright & Tough™ Night Sight Suppressor Set — White Front/Black Rear with Green Lamps — for Glock® Models 17, 17L, 19, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38 and 39
The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE
SR-25 URX wrench. This wrench is required when installing a URX rail system on an SR-25 rifle. Not for use with SR-15 rifles. For the SR-15 URX wrench, use PN:20495.
Reviews
There are no reviews yet.