![Logo_High Rez_KFA Primary Logo [Color]](https://kfarmorystg.wpenginepowered.com/wp-content/uploads/2024/03/Logo_High-Rez_KFA-Primary-Logo-Color.png#106031){kind=logo}
B&T SQD-M 9mm Suppressor
$1,000.00
The Super Quick Disconnect, or SQD attachment, for our RBS9 suppressor has many features that have yet to be seen in any previous suppressor produced by B&T. The RBS9 SQD is an ingenious fusion of the reduced backpressure system (RBS) technology for which B&T is known for, and a totally new one-hand, 3-lug mounting system. The system is both smooth and fast to use. The new SQD mounting system is perhaps the fastest 3-Lug attachment system of its type. The new RBS SQD suppressor will fit all 9mm weapons featuring a 3-Lug barrel interface. This includes but is not limited to B&T’s APC9, SPC9, GHM9, as well as HK’s MP5, MP5K and variants with in-spec tri-lug barrels.
Quick Specs
Caliber: 9mm
Operation: N/A
Mag Capacity: N/A
Weight: 22 oz / 622g
4 in stock
SD-SQD-M-9
| Weight | 2 lbs |
|---|---|
| Dimensions | 12.5 × 2.5 × 2.25 in |
| UPC | 840225716320 |
| MPN | SD-SQD-M-9 |
Related products
-
B&T SRBS 7.62 Suppressor
$950.00Addressing the issue of signature common to reduced backpressure designs, the SRBS762 series provides the same flash reduction expected of a B&T suppressor while maintaining a remarkably quiet tone. The SRBS762 series also features a redesigned low-flash endcap, 1.375×24 TPI HUB compatibility, a new exterior texture, and a bead-blasted finish, all in a lightweight 3D-printed package.
Quick SpecsCaliber: 7.62 NATO
Operation:
Mag Capacity:
Weight: 18.4 oz / 521g
-
B&T 5.56 SF Titanium HUB Adapter
The Rotex-SF HUB is fully compatible with all 1.375x24TPI “HUB” compatible suppressors on the market today and is constructed of Titanium and stainless steel components. This HUB is compatible with all B&T Rotex flash hiders, as well as all SureFire SOCOM flash hiders, muzzle brakes and WarComp hybrid muzzle devices. The HUB is simply threaded into compatible suppressors and snugged up with a spanner wrench. HUB assemblies can be semi-permanently attached using Rocksett or other thread locking compounds should the end user desire. The Rotex-SF HUB ships standard with all Rotex and SRBS rifle suppressors.
Fully HUB Compatible (1.375x24TPI)
Constructed of Titanium and Stainless Steel
B&T Rotex Flash Hider and SureFire SOCOM Muzzle Device compatible
One-Hand Mounting System
5.56x45mm Compatible
Not Compatible with the SFA2-556 SF Muzzle Device -
B&T Tiger 22 Suppressor
$425.00B&T’s Tiger 22 Suppressor is truly an all-arounder. From small game hunting to target plinking, this ultra-lightweight suppressor is the ultimate addition to your .22 rimfire pistol or rifle. At less than six inches in length, and a feathery 3.5-ounces, the suppressor will go virtually unnoticed — until you start pulling the trigger.
-
Geissele Automatics 5.45mm Suppressor Alignment Gage
$125.00Caliber: 5.45mm 17″ Length Manufactured from hardened steel that has been ground 0.002” under nominal bore diameter Outside diameter is finely finished and straight to 0.001” over its length Made in the U.S.A.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.