$80.00
The AO Chest Rig is feature rich and low cost. The front panel is efficiently constructed to provide three rows and eight columns of PALS. The panel has side openings to store paperwork or maps. This rig also features a hook fastener panel on the back side for easy integration onto many plate carrier systems. A carry handle is sewn into the top to allow quick transport if you have to grab and go.
The HSGI® Small H-Harness is included with the AO Chest Rig. This allows the weight to be distributed evenly, and creates a level of comfort over and above the X-backed shoulder straps found on most small chest rigs. Add three TACOs® and a Bleeder/Blowout PouchTM and you have the perfect setup.
• Front panel efficiently constructed to provide three rows and eight columns of PALS webbing
• Has side openings to store paperwork or maps
• Carry handle is sewn into the top to allow quick transport if you have to grab and go
• Features hook backing for use with other systems and separate loop panel to cover backing when not in use
• HSGI® H-Harness is included
16 in stock
Weight | 1 lbs |
---|---|
Dimensions | 14.5 × 1.5 × 1.5 in |
UPC | 849954010716 |
TRIJICON 6.1MM REAR STD FRNT BAGGED SIGHT SET GLOCK STD FRAME GEN 5(NR17A25 AND NF17A24)
Trijicon, RMRcc (Concealed Carry), Micro Reflex Sight, 13mm Objective Lens, 6.5 MOA Red Dot, Black Color
The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE
Replaces the stock plate, ambidextrous. Includes KAC heavy duty 1-1/4″ push-button sling swivel shown.
QD swivel socket is anti-rotation. Receiver extension nut included is now a standard castle nut so a common castle nut wrench can be used for installation.
Reviews
There are no reviews yet.