$122.00
This slim, versatile modular padded belt system adds more options the HSGI® padded belt family. All the performance of our original system, but at a lower weight and lower profile.
• .75″ thick and 3.25″ tall
• Neoprene padding creates a “gel-like” comfort
• Adds a level of grip that is unlike any other belt system on the market
• Individual PALS platforms allow the inner belt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting for holsters and other accessories
• Four suspender attachments are positioned strategically if suspenders are needed
• Assembled with a removable HDPE stiffener to add stability
Covered by HSGI’s® Lifetime Warranty. Made in the USA.
See the HSGI® Clips 101 video above at 1:45 for how to attach pouches to our Slim-Grip® using our HSGI® Clips.
IF YOU WISH TO ORDER A COBRA® RIGGER BELT TO MATE WITH THE SLIM-GRIP® PADDED BELT, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SLIM-GRIP® SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.
FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT.
Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.
Below is the total length of the SGPB for sizing:
30.75″ end to end – If you choose a COBRA® belt for this Slim-Grip®, the smallest COBRA® you should order is Medium
37.5″ end to end – If you choose a COBRA® belt for this Slim-Grip®, the smallest COBRA® you should order is Large
42.5″ end to end – If you choose a COBRA® belt for this Slim-Grip®, the smallest COBRA® you should order is XL
46″ end to end – If you choose a COBRA® belt for this Slim-Grip®, the smallest COBRA® you should order is 2X
1 in stock
Weight | 1 lbs |
---|---|
Dimensions | 30.75 × 0.5 × 0.5 in |
UPC | 849954016886 |
This KAC 34mm Extended Eye Relief 1-Piece Scope Mount is constructed of lightweight aluminum and is compatible with any Picatinny-type top rail. It is canted forward to allow for greater eye relief when using a large variable power optic on a rifle with limited top rail space. Attaches via a pair of 1/2″ bolts.
Ring Size: 34mm
Right Height: 1.5″
Material: Aluminum
Color: Black
Vertical Forward Pistol Grip that fits any MIL-STD-1913 rail and available in Black, Tan, Green, or Taupe.
Picatinny rail scope cap allows for attaching accessory sighting systems.
The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE
Reviews
There are no reviews yet.