![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
Sig Sauer SIG AIR P226/P229 Magazine, 16rd, .177 cal – 2 Pack
$24.99
Pack of 2 factory replacement magazines for the SIG SAUER P226, P229 and P250 .177 cal Air Pistols. These magazines feature dual 8 shot rotary clips located at each end of the magazine for a total capacity of 16 rounds. The clips are equipped with a centrally located magnet making it possible for them to accept steel BB’s as well as the traditional lead pellets.
This magazine is compatible with the following SIG AIR models.
P226, CO2, PELLET (AIR-226F-177-12G-16-BLK)
P226, CO2, PELLET, TAN (AIR-226F-177-12G-16-FDE)
P229, CO2, PELLET (AIR-P229RX-177-BLK)
P250, CO2, PELLET (AIR-P250F-177-12G-16-BLK)
PLEASE NOTE: These magazines are not compatible with the P320 ASP Air Pistol.
4 in stock
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 9 × 6 × 1 in |
| UPC | 798681543427 |
| MPN | AMPC-177-16 |
Related products
-
KAC 7 Piece Panel Kit, Keymod URX 4 – FDE
$20.11The KAC Keymod Flat Panel Kit includes a set of seven 5.5 polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE -
KAC Picatinny Rail Panel, Black Finish, Picatinny Rail Sections, 3.9″, 9-RIB
$26.59KAC’s iconic Ribbed Rail Panels have seen use all over the globe on US military M4 Carbines. The lightweight polymer panels are ribbed for an enhanced grip, and help insulate the support hand from barrel heat. While originally designed for use on the KAC M4 RIS and M4 RAS rails, these panels are also compatible with many other railed handguards.
Material: Polymer
Ribs: 9
Length: 5.48″
Color: Black, FDE
-
KAC URX 4 IBN Keymod Rail 5.56mm 13.0″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
-
KAC URX 4 IBN Keymod Rail 5.56mm 14.5″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products. It is not suggested to use this rail with a 14.5″ or shorter barrel unless using a muzzle device such as the AAC flash hider which can be installed from the end with a tool.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.