![Logo_High Rez_KFA Primary Logo [Color]](https://kfarmorystg.wpenginepowered.com/wp-content/uploads/2024/03/Logo_High-Rez_KFA-Primary-Logo-Color.png#106031){kind=logo}
SilencerCo ASR MOUNT
$137.70
The (ASR) Active Spring Retention Mount is a quick attached / detach system for your suppressors that pairs with the ASR Flash Hider, ASR Closed-Tine Flash Hider, ASR Muzzle Brake, and ASR Single Port Muzzle Brake and is one of the best performing mounting systems available for rifles. The locking ring ensures that the suppressor will not rotate while in use. The mount seats over your ASR Muzzle Device and creates a direct connection to your suppressor, allowing for the use of the muzzle device with the suppressor for even better performance.
Alpha accessories are compatible with the Spectre 9, Omega K Series, and Alpha MAAD Brakes
Bravo accessories are compatible with Omega 300, Hybrid 46, Scythe-Ti, and Bravo MAAD Brakes
Charlie accessories are compatible with Chimera 300, Omega 36M, Hybrid 46M, Saker 556K, Velos LBP Series, and Charlie MAAD Brakes.
2 in stock
AC622
https://kfarmory.com/wp-content/uploads/2024/11/SILENCERCO_AC622_ASR-MOUNT-WEB.jpg
| Weight | 1 lbs |
|---|---|
| Dimensions | 6.5 × 4.5 × 1.5 in |
| UPC | 817272011883 |
| MPN | AC622 |
Related products
-
KAC Picatinny Rail Panel, Black Finish, Picatinny Rail Sections, 3.9″, 9-RIB
$26.59KAC’s iconic Ribbed Rail Panels have seen use all over the globe on US military M4 Carbines. The lightweight polymer panels are ribbed for an enhanced grip, and help insulate the support hand from barrel heat. While originally designed for use on the KAC M4 RIS and M4 RAS rails, these panels are also compatible with many other railed handguards.
Material: Polymer
Ribs: 9
Length: 5.48″
Color: Black, FDE
-
KAC 7 Piece Panel Kit, Keymod URX 4 – FDE
$20.11The KAC Keymod Flat Panel Kit includes a set of seven 5.5 polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE -
KAC Crest Patch, Green
$5.00These rugged patches are available in three different color schemes and couple perfectly with any KAC Gear equipped with hook and loop fasteners. Size is approx. 2″ x 3″.
-
KAC URX 4 IBN Keymod Rail 5.56mm 13.0″ Length
$289.67URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.