$1,214.00
The best short-barrel 5.56 mm (.223 caliber) suppressor available
Employs SureFire Total Signature Reduction® technology to virtually eliminate first-round flash, and reduce sound and dust signatures
Weighs a mere 17 ounces; minimal effect on weapon handling
Adds as little as 3.8 inches to overall weapon length
Use The Right Utensil. You don’t have to compromise on the performance or reliability of your suppressor just because your primary is a short-barrel rifle. The SOCOM556-SB2 is designed and engineered by the same dedicated team that produced the USSOCOM suppressor trial-winning SOCOM556-RC. The SB2’s larger bore diameter and innovative internal design deliver extremely low-back pressure and stealthy sound attenuation in a rugged suppressor optimized for rifle barrels of 10 inches or less. Its high-temperature alloys and stainless steel components are CNC laser-welded for strength and durability even when the SB2 is used in full-auto mode. Its innovative internal baffling significantly decreases back pressure, cyclic rate, and gas blowback while delivering tremendous accuracy with a minimal and consistent point-of-impact shift. It’s the right tool for the job.
2 in stock
| Weight | 1.55 lbs |
|---|---|
| Dimensions | 3.25 × 10 × 3.25 in |
| UPC | 2902000000000 |
| MPN | SOCOM556-SB2-DE |
The legendary 1911 design has been brought into the 21st century with the refinements today’s shooters demand. The 1911 Fastback Carry Nightmare pistol features a stainless steel frame with rounded grip and mainspring housing. Each pistol is built using premium internal parts including a match grade barrel, hammer/sear set and trigger. The all Nitron coated frame and slide is contrasted with natural stainless controls, barrel bushing, extractor and grips screws. The Nightmare is finished with a set of black G10 double diamond grips that makes this 1911 SIG SAUER looks as good as it performs.
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
Connects to all 7.62 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 5.7″ (16cm)
Overall Length: 6.4″ (20.06cm)
Weight: 19.8oz (658g)
Connects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 3.85″ (9.78cm)
Addition to QDC 3-prong FH: 2.33″ (5.92cm)
Overall Length: 4.43″ (11.25cm)
Weight: 13.9oz (395g)
Sound Reduction: 12dB
KAC’s Pressure Reduction Technology (PRT) Signature Reduction Device line blends the proven durability and acoustic performance of the previous generation of KAC suppressors with pressure reduction design.
These suppressors are specifically engineered to release the majority of the pressure contained in the device and bore prior to the operating system beginning extraction, which significantly reduces the negative effects of suppressor integration, and reduces felt recoil compared to a traditional suppressor with the same level of sound reduction.
Muzzle flash, and specifically first-round flash, has also been directly addressed and minimized with the PRT design. The Quick Disconnect (QDC) mounting method ensures reduced carbon-lock, as well as minimal but repeatable point of impact shift when transitioning between suppressed and unsuppressed configurations.
For interval maintenance, the PRT devices can be cleaned with commonly used bore solvents or ultrasonic tank cleaning with a water rinse.
The Knight’s Armament 5.56 QDC/CRS-PRT connects to all 5.56 QDC Muzzle Devices.
Addition to Bare Muzzle: 5.67? (14.41cm)
Addition to QDC 3-prong FH: 4.15? (10.55cm)
Overall Length: 6.25? (15.88cm)
Weight: 19.2oz (545g)
Sound Reduction: 24dB
Reviews
There are no reviews yet.