Easily swap your SF Ryder 9 series suppressor to multiple weapons
Pistons available in 1/2×28 or M13.5×1 LH thread patterns
Manufactured from heat-treated stainless steel for superior durability
Switch With Ease. The SF® Ryder 9 Piston is a threaded component used to attach an SF Ryder 9-Ti, SF Ryder 9M-Ti or SF Ryder 9-Ti2 suppressor to the threaded barrel of the host weapon, allowing the suppressor to be used on multiple weapons. These pistons are machined from heat-treated stainless steel and have a black nitride finish.
Out of stock
| UPC | 084871325578 | 
|---|---|
| MPN | PISTON-9-M13.5X1LH | 
Quick Specs
Caliber: 9x19MM
Operation: Hydraulic Assisted Blowback
Mag Capacity: 10, 15, 20, 25, 30
Weight: 5.2lbs / 2.3kg
Barrel Length: 115mm/4.5″
Material: Aluminum Upper, Polymer Lower
The exact flash hider that helped create the SureFire SOCOM legacy
Significantly reduces muzzle flash compared to a bare muzzle
Multiple bearing surfaces provide superior suppressor alignment
Always Choose SureFire. Our FH556RC-1/2-28 SOCOM 4-Prong Flash Hider for 5.56 mm weapon platforms is the exact flash hider that SureFire developed to dominate the most rigorous suppressor trial in military history and earn the USSOCOM suppressor contract, and our FH762RC-5/8-24 delivers the same level of performance and durability for 7.62 mm/.308 caliber rifles. Their four-tine design significantly reduces muzzle flash — typically greater than 99% compared to a bare muzzle — delivering extreme signature reduction and rugged dependability. With multiple bearing surfaces that ensure proper suppressor alignment, these flash hiders also serve as a rock-solid mounting platform for any SureFire SOCOM Fast-Attach® suppressor. Precision-machined from U.S. mill-certified stainless-steel bar stock, and heat-treated for added strength, they are highly resistant to gas and particle erosion, so you can depend on them to provide years of faithful service. SureFire flash hiders are individually inspected to ensure concentricity and alignment and covered by SureFire’s No-Hassle Guarantee.
The SureFire-approved way to verify proper suppressor alignment
Precision-machined rod will show any deviation in alignment
Specific rods available for most popular calibers
Caliber
5.56 mm, 6.5 mm, 6.8 mm, 7.62 mm, 9 mm, .338 cal
Construction
Heat-Treated Stainless Steel
Get It Right The First Time. SureFire Bore Rods are valuable tools that will ensure proper concentricity along the bullet flight path when firing suppressed on a new platform. The rod most closely represents the bullet flight path and will show any misalignment, if present. SureFire recommends that operators verify barrel-to-adapter-to-suppressor alignment on any new build or any previously unshot setup, and SureFire Bore Rods are the most effective way to confirm it. Simply choose the corresponding rod for your caliber rifle or carbine.
KAC’s newest answer for a superior rifle suppressor  3D printed and incorporating their Pressure Reduction Technology (PRT)
KAC PN 119354-BLK & 119354-FDE
Connects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 3.85″ (9.78cm)
Addition to QDC 3-prong FH: 2.33″ (5.92cm)
Overall Length: 4.43″ (11.25cm)
Weight: 13.9oz (395g)
Sound Reduction: 12dB
 
															 
															 
															
Reviews
There are no reviews yet.