Product Details
The Aimpoint CompM4 was designed for users who require a professional quality red dot optic for use under extremely harsh conditions. The CompM4 is currently used and trusted by top tier end users throughout the free world. The U.S. Army has chosen a member of the Aimpoint CompM4 series of sights as their M68CCO (Close Combat Optic) for over two decades. The brother to CompM4 – the CompM4s – holds that status today, with over 100,000 sights currently in use by the U.S. Armed Forces. The difference between the two sights is the battery compartment placement – the CompM4 has a high battery compartment and the CompM4s™ has a low battery compartment. The CompM4 is powered by a single AA battery for over 80,000 hours (8 years) of continuous use and over 500,000 hours in the night vision settings.
The CompM4 comes with a rubber bikini lens cover and the killFlash® anti-reflection device (ARD) to prevent glint from the front lens in the heat of battle. The sight housing is constructed of hard-anodized aluminum alloy for optimal protection of the electronic and optical components in all types of environmental conditions. The 2 MOA red dot pairs perfectly with the Aimpoint 3XMag-1™ magnifier and all generations of night vision devices. This optic is sold without a mount. A wide variety of Aimpoint Micro mounts are available through the Official Aimpoint store.
Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence.
UNIQUE FEATURES
2 MOA red dot for precision and fast target acquisition
Battery life: 80,000 hours (over 8 years) of constant operation with one battery on setting 12 and over 500,000 hours in NVD settings
Battery type: AA battery (included)
High battery compartment
Mount base (sold separately) is keyed into to the body of the sight to absorb recoil
Removable Rubber Bikini lens covers
Front lens opening is threaded for addition of killFlash® anti-reflective device (ARD)
Hard anodized non-reflective surface
16 brightness settings: 7 night vision compatible settings and 9 daylight settings
1X (non-magnifying) operationally parallax free optic
Submersible to 150 feet (45 meters)
Temperature span -49°F to +160°F
Weight 9.4 oz / 268 g (sight only)
Out of stock
The KAC Keymod Flat Panel Kit includes a set of seven 5.5 polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products. It is not suggested to use this rail with a 14.5″ or shorter barrel unless using a muzzle device such as the AAC flash hider which can be installed from the end with a tool.
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
Scope mount for day optics.1.94″ right height and forward position for extended eye relief. One piece construction.
Ring Size: 30mm
Right Height: 1.94″
Weight: 7.4oz