![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
-
Geissele Automatics Super Precision 34mm Hyper Extended Scope Mount
Geissele Super Precision AR-15 Hyper Extended Scope Mount 34mm Aluminum Black, Hyper Extended distance: 1.76″
-
Geissele Automatics Super MCX SSA – M4 Curved Trigger
$325.00Geissele Automatics, Super MCX SSA, M4 Curve Bow
-
B&T USW-320 Polymer Lower for SIG P320
Polymer lower for USW-320, Black With Stock Kit
(BT-430174-K)
-
LMT 308 Lower Parts Kit w/ Trigger
$324.00LMT.308 LOWER PARTS KIT, 2 Stage Trigger, Hammer, S/A Ambi Selector
-
B&T APC223/300/308 Folding Stock w/Hydraulic Buffer
$319.00B&T APC223/300/308 Folding Stock w/Hydraulic Buffer
-
KAC MODULAR SELECTOR KIT, SERIES 2, SEMI AUTO
$303.20Includes multiple selector options. Choice of any combination of short/long, left/right side selectors. Semi-flush indicator that provides visual indication of the rifle’s firing mode only.
-
KAC URX 4 IBN Keymod Rail 5.56mm 14.5″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products. It is not suggested to use this rail with a 14.5″ or shorter barrel unless using a muzzle device such as the AAC flash hider which can be installed from the end with a tool.
-
Surefire Warden Fast-Attach® Blast Regulator
$296.00Non-NFA device directs blast concussion away from areas left and right of shooter’s firing position
Precision-machined of rugged stainless steel, heat treated and coated with a durable Cerakoteâ„¢ finish
SureFire SOCOM Fast-Attach® adapter mount provides fast, easy attachment and removal
Blast Forward. The SureFire Warden Blast Regulator for 5.56 and 7.62 mm weapons is engineered to direct the concussive blast of the fired round forward of the weapon system without venting gas to the side, as seen with standard muzzle brakes. This aids in reducing the overpressure felt by others immediately to the left and/or right of the shooter’s firing position. It also limits any dust signature from the weapon when fired from a prone position. This version of the Warden quickly and easily mounts to any SureFire SOCOM Fast-Attach® 5.56 or 7.62 muzzle device through the same patented system found on SureFire SOCOM Fast-Attach® Series suppressors. Unlike sound suppressors, Wardens are not NFA devices and are available wherever SureFire products are sold, without any of the restrictions associated with suppressors. -
Surefire Warden Fast-Attach® Blast Regulator
$296.00Non-NFA device directs blast concussion away from areas left and right of shooter’s firing position
Precision-machined of rugged stainless steel, heat treated and coated with a durable Cerakoteâ„¢ finish
SureFire SOCOM Fast-Attach® adapter mount provides fast, easy attachment and removal
Blast Forward. The SureFire Warden Blast Regulator for 5.56 and 7.62 mm weapons is engineered to direct the concussive blast of the fired round forward of the weapon system without venting gas to the side, as seen with standard muzzle brakes. This aids in reducing the overpressure felt by others immediately to the left and/or right of the shooter’s firing position. It also limits any dust signature from the weapon when fired from a prone position. This version of the Warden quickly and easily mounts to any SureFire SOCOM Fast-Attach® 5.56 or 7.62 muzzle device through the same patented system found on SureFire SOCOM Fast-Attach® Series suppressors. Unlike sound suppressors, Wardens are not NFA devices and are available wherever SureFire products are sold, without any of the restrictions associated with suppressors. -
Surefire 2211 Signature WristLight Rechargeable Variable-Output LED WristLight + Watch
$296.00Innovative SureFire light plus watch that keeps your hands free for emergencies
Ergonomically aligns with two-handed firearm grip technique
Variable output; choose between 300, 60 and 15 lumens
Survive The Night Watch. Developed with input from active-duty police officers, the 2211® Signature combines hands-free tactical illumination with a fully integrated timepiece for effective combat use in a broad range of low-light scenarios. When strapped to your support-side wrist, the 2211 Signature automatically aligns with a handgun held with a standard two-handed grip, projecting tremendous light for threat identification at close to medium range in low light and darkness. Its broad MaxVision Beam® generates a seamless wall of white light at three output levels: 300, 60, and 15 lumens, and its bright enough to disrupt an aggressor’s dark-adapted vision, providing a tactical advantage. For a go-anywhere tactical light with a fully integrated timepiece — at an attractive price point to boot — the 2211 Signature WristLight is without equal.Warning!:
Remove immediately and recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
Even used batteries may cause severe injury or death.
Call a local poison control center for treatment information.
Non-rechargeable batteries are not to be recharged.
Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating), or incinerate. Doing so may result in injury due to venting, leakage, or explosion resulting in chemical burns.
Ensure the batteries are installed correctly according to polarity (+ and -).
Do not mix old and new batteries, different brands, or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children. -
KAC URX 4 IBN Keymod Rail 5.56mm 13.0″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5”, 10”, 10.75″, 13”, and 14.5” lengths, and is equipped with KnightÂ’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, KnightÂ’s Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
-
KAC SR-15/SR-16 Chrome Sand Cutter Bolt Carrier
Debris channels to allow movement and operation in adverse conditions. Hard chrome finish. Fits KAC SR-15/SR-16 and other AR-15 variants. Carrier Only.
-
KAC URX 4 IBN Keymod Rail 5.56mm 10.75″ Length
The KAC URX 4 Rail is a fully modular design that utilizes the revolutionary KeyMod accessory mounting system. The URX 4 Rail is stronger and more stable than previous URX designs due to its one piece construction. It is also lighter due to its Integral Barrel Nut (IBN) system of attachment. The IBN system allows the rail itself to act as the barrel nut when torqued onto the rifle, completely eliminating the need for a separate steel barrel nut. KeyMod accessories may be mounted anywhere along the URX 4Â’s length, making it one of the most user configurable designs on the market. The URX 4 includes two QD sling swivel sockets, one on the left side and one on the right.
Specifications:
Length: 10.75″
Weight: 10.2 oz
Inside Diameter: 1.55″
Outside Diameter: 1.68″ (Side to Side)Each URX 4 Rail comes complete with an installation wrench, shim kit and instructions. Other lengths available include 8.5″, 10″, 13″, and 14.5″.
-
KAC URX 4 IBN Keymod Rail 5.56mm 10.0″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. URX 4 includes two QD sling swivel sockets at the rear of the rail. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products.
-
B&T Adaptor M4 Foldable Complete
$276.00Adaptor M4 Foldable Complete
(BT-361415)
Includes:
BT-361409 Stock Adaptor
BT-36320 Recoil Buffer
BT-36311 Recoil Buffer Pin
BT-36315 Sticker
BT-20564 M4 Tube Adaptor Foldable (1 3/16″-16 UNR)
BT-36307 Stock Release Button Spring
BT-20169 Stock Release Button
BT-36314 Folding Stock Axle Screw
BT-22276 Sling Attachment Loop
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
