The exact flash hider that helped create the SureFire SOCOM legacy
Significantly reduces muzzle flash compared to a bare muzzle
Multiple bearing surfaces provide superior suppressor alignment
Always Choose SureFire. Our FH556RC-1/2-28 SOCOM 4-Prong Flash Hider for 5.56 mm weapon platforms is the exact flash hider that SureFire developed to dominate the most rigorous suppressor trial in military history and earn the USSOCOM suppressor contract, and our FH762RC-5/8-24 delivers the same level of performance and durability for 7.62 mm/.308 caliber rifles. Their four-tine design significantly reduces muzzle flash — typically greater than 99% compared to a bare muzzle — delivering extreme signature reduction and rugged dependability. With multiple bearing surfaces that ensure proper suppressor alignment, these flash hiders also serve as a rock-solid mounting platform for any SureFire SOCOM Fast-Attach® suppressor. Precision-machined from U.S. mill-certified stainless-steel bar stock, and heat-treated for added strength, they are highly resistant to gas and particle erosion, so you can depend on them to provide years of faithful service. SureFire flash hiders are individually inspected to ensure concentricity and alignment and covered by SureFire’s No-Hassle Guarantee.
Out of stock
UPC | 084871314350 |
---|---|
MPN | FH762K05 |
The KAC Keymod Flat Panel Kit includes a set of seven 5.5” polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE
The KAC URX 4 Rail is a fully modular design that utilizes the revolutionary KeyMod accessory mounting system. The URX 4 Rail is stronger and more stable than previous URX designs due to its one piece construction. It is also lighter due to its Integral Barrel Nut (IBN) system of attachment. The IBN system allows the rail itself to act as the barrel nut when torqued onto the rifle, completely eliminating the need for a separate steel barrel nut. KeyMod accessories may be mounted anywhere along the URX 4Â’s length, making it one of the most user configurable designs on the market. The URX 4 includes two QD sling swivel sockets, one on the left side and one on the right.
Specifications:
Length: 10.75″
Weight: 10.2 oz
Inside Diameter: 1.55″
Outside Diameter: 1.68″ (Side to Side)
Each URX 4 Rail comes complete with an installation wrench, shim kit and instructions. Other lengths available include 8.5″, 10″, 13″, and 14.5″.
KAC’s line of Micro Iron Sights are currently in use by the United States Army, Marine Corps and numerous law enforcement agencies worldwide. This is because they are built to exacting tolerances, maintain their zero under adverse conditions and, when folded, have one of the lowest profile top-rail footprints in the industry. Our highly versatile 200-600 Meter Micro Rear Sight features a finger-adjustable, rotating drum that enables shooters to engage targets from 200 to 600 meters with both speed and accuracy.
Specifications:
Material: Steel
Elevation Adjustable: Yes
Windage Adjustable: Yes
Zeroing Tips:
25/300 Meter Zero: Place a target 25 meters down range. Turn the rear sight drum to the ‘Z’ setting and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, turn the rear sight drum to the ‘3’ setting and confirm zero at 300 meters. 50/200 Meter Zero: Place a target 50 meters down range. Turn the rear sight drum to the ‘2’ setting and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, place a target 200 meters down range and confirm zero.
Keymod mounted, 7-slot MILSTD 1913 picatinny rail segment. Fits the KAC URX 4 or other Keymod-style rails.
This KAC Keymod Accessory Rail is 3.7″ in length and provides a 7 slot section of mil-spec M1913 Picatinny rail for the addition of tactical accessories. Designed specifically for the URX 4 handguard, this rail section is also compatible with any other rifle handguard that has a Keymod interface. Aluminum construction.
Specifications:
Overall Length: 3.7″
M1913 Picatinny Rail Slots: 7
Reviews
There are no reviews yet.