This new version is of our modular padded belt system is constructed with a laser-cut, proprietary heavy-duty nylon laminate. This belt’s slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.

• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Additional row of laser-cut PALS on wide back panel for comfort and larger pouches
• Individual laser-cut PALS panels allow the innerbelt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting holsters and other accessories
• Assembled with an HDPE stiffener for added stability

Covered by HSGI’s® Lifetime Warranty. Made in the USA.

IF YOU WISH TO ORDER A COBRA® RIGGER BELT TO MATE WITH THE SURE-GRIP® PADDED BELT, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SURE-GRIP® PADDED BELT SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.

FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT. IF YOU CHOOSE THE DUTY BELT, PLEASE CHOOSE THE CLOSEST WAIST SIZE TO THE LENGTH OF PADDED BELT CHOSEN.

Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.

Below is the total length of the SGPB for sizing:
31″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Medium
36.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Large
41.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is XL
46.75″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is 2X

Sewn with strength and attention to detail, this belt is equipped with the proven quick-release COBRA® buckle and is available with a sewn-in or integrated D-ring. The interior loop fastener is designed to match up with our Sure-Grip® Padded Belts or ABM pouches to lock the belt or pouches into place.

• Constructed with two layers of 1.75″ Type 13 webbing
• Additional rigidity and stiffness are added with a proprietary adhesive before sewing
• Buckle color matches belt (IDR buckle is always black)

*Use actual measurements and not pant size when picking your belt size*

Small – 28″-30″
Medium – 32″-34″
Large – 36″-38″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″

Covered by HSGI’s® Lifetime Warranty. Made in the USA.

**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**

Sewn with strength and attention to detail, this belt is equipped with the proven quick-release COBRA® buckle and is available with a sewn-in or integrated D-ring. The interior loop fastener is designed to match up with our Sure-Grip® Padded Belts or ABM pouches to lock the belt or pouches into place.

• Constructed with two layers of 1.75″ Type 13 webbing
• Additional rigidity and stiffness are added with a proprietary adhesive before sewing
• Buckle color matches belt (IDR buckle is always black)

*Use actual measurements and not pant size when picking your belt size*

Small – 28″-30″
Medium – 32″-34″
Large – 36″-38″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″

Covered by HSGI’s® Lifetime Warranty. Made in the USA.

**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**

Sewn with strength and attention to detail, this belt is equipped with the proven quick-release COBRA® buckle and is available with a sewn-in or integrated D-ring. The interior loop fastener is designed to match up with our Sure-Grip® Padded Belts or ABM pouches to lock the belt or pouches into place.

• Constructed with two layers of 1.75″ Type 13 webbing
• Additional rigidity and stiffness are added with a proprietary adhesive before sewing
• Buckle color matches belt (IDR buckle is always black)

*Use actual measurements and not pant size when picking your belt size*

Small – 28″-30″
Medium – 32″-34″
Large – 36″-38″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″

Covered by HSGI’s® Lifetime Warranty. Made in the USA.

**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**

This slim, versatile padded belt system adds more options to the HSGI® padded belt family. The Duty-GripTM is constructed with a laser-cut proprietary heavy-duty nylon laminate. Designed with the patrol officer in mind, the Duty-GripTM was fielded by numerous law enforcement officers and departments. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The Duty-GripTM features a complete series of vertical laser-cut slots that allow a rigger or duty belt to weave securely to expose any or nearly all of the belt for attaching belt-mounted pouches and holsters. Because of its unique design, paired inner belts don’t require interior hook fastener. At 2.75″ tall, the Duty-GripTM is our slimmest padded belt yet and is still compatible with belts up to 2″.

• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Vertical laser-cut slots for weaving and securing rigger or duty belt while still exposing most of the interior belt for attaching belt-mounted pouches and holsters, perfect for any duty rig
• At 2.75″ tall, the Duty-Grip™ is our slimmest padded belt yet

Covered by HSGI’s® Lifetime Warranty. Made in the USA.