Surefire 9mm Bore Alignment Rods For Suppressor Alignment Tools
$125.00
The SureFire-approved way to verify proper suppressor alignment
Precision-machined rod will show any deviation in alignment
Specific rods available for most popular calibers
Caliber
5.56 mm, 6.5 mm, 6.8 mm, 7.62 mm, 9 mm, .338 cal
Construction
Heat-Treated Stainless Steel
Get It Right The First Time. SureFire Bore Rods are valuable tools that will ensure proper concentricity along the bullet flight path when firing suppressed on a new platform. The rod most closely represents the bullet flight path and will show any misalignment, if present. SureFire recommends that operators verify barrel-to-adapter-to-suppressor alignment on any new build or any previously unshot setup, and SureFire Bore Rods are the most effective way to confirm it. Simply choose the corresponding rod for your caliber rifle or carbine.
3 in stock
| Weight | 0.45 lbs |
|---|---|
| Dimensions | 17.5 × 0.75 × 0.75 in |
| UPC | 084871330343 |
| MPN | SF-ROD-9 |
Related products
-
KAC 7 Piece Panel Kit, Keymod URX 4 – FDE
$20.11The KAC Keymod Flat Panel Kit includes a set of seven 5.5 polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE -
KAC URX 4 IBN Keymod Rail 5.56mm 13.0″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
-
KAC 30mm KAC EER MOD 1 Scope Mount
$330.50Scope mount for day optics.1.94″ right height and forward position for extended eye relief. One piece construction.
Ring Size: 30mm
Right Height: 1.94″
Weight: 7.4oz
-
KAC 30mm Viper, Picatinny Scope Cap
Picatinny rail scope cap allows for attaching accessory sighting systems.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.