![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
-
Aimpoint® ACRO P-2™ 3.5 MOA – Red Dot Reflex Sight
$750.00Product Details
Get the Acro Advantage.Aimpoint® has once again advanced the standard for pistol mounted optics with the introduction of the Acro P-2™ red dot sight. This next generation sight incorporates an improved LED emitter coupled with a higher capacity CR2032 battery to provide an astonishing five years (50,000 hours) of constant-on power while getting you on target faster and more accurately.
Designed to endure the physical forces generated by semi-automatic pistol slides, the ACRO™ series was the first pistol sight to offer a fully enclosed optical channel to protect the LED emitter. Built to exceed the requirements of professional users, the Acro P-2 has been tested and proven to withstand the extreme shock, vibration, temperatures, and material stresses generated by firing over 20,000 rounds of .40 S&W ammunition.
The new high efficiency LED emitter provides a sharp 3.5 MOA dot. Protective clear glass front and rear lenses guard the advanced reflective lens system. The new digital intensity adjustment keypad provides a more distinct tactile feel when adjusting the dot intensity, and these controls are now placed next to the battery compartment to help protect the power adjustments against unintentional changes.
In addition to use as a primary optic on handguns, the Acro P-2 can be mounted on carbines, shotguns and rifles or utilized as a backup sight on magnified scopes and thermal imagers. The sight can be mounted on a wide range of optics-ready handguns using adapter plates. It is night vision compatible, and the dot can also be turned up for use in bright sunlight.
Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence.
UNIQUE FEATURES
3.5 MOA red dot for precision and fast target acquisition
Battery life: 50,000 hours (over 5 years) of constant operation with one battery on setting 6
Battery type: CR2032 battery (battery included)
Battery can be quickly changed without removing optic
Variety of mounting options sold separately
Optimized for pistol and applications which require a low-profile red dot system
Fully enclosed housing protects all electronic components of the sight from all elements
Sealed optical channel protects the optic from rain, mud, sand, or snow
7075-T6 High-strength Aluminum Hard-anodized
10 brightness settings: 4 night vision compatible settings and 6 daylight settings
1X (non-magnifying) operationally parallax free optic
Submersible to 115 feet (35 meters)
Temperature span -49°F to +160°F
Weight 2.1 oz / 60 g (sight only)
Size 1.9” x 1.3” x 1.2” (L x W x H)
A VARIETY OF MOUNTING SOLUTIONS AVAILABLE
The Acro P-2 sight can be used on a wide range of weapon platforms in combination with different mounting solutions developed especially for this ultra-compact red dot optic.The solutions now available are:
Quick detachable mounts for Weaver and MIL-STD 1913 Rail system/Picatinny rail, a wide range of adapter plates for optics-ready pistols, and an interface for the Aimpoint® Micro mount that allows compatibility with all Micro sights mounting solutions.
Examples of Acro series mounts and adapter plates:
Acro QD Mount 22 mm, item no. 200517
Acro QD Mount 30 mm, item no. 200518
Acro QD Mount 39 mm, item no. 200519
Acro Adapter Plate for Micro Interface, item no. 200526
Acro Adapter Plate for Glock Rear Sight, item no. 200622
Acro Adapter Plate for Glock MOS, item no. 200520
Acro Adapter Plate for HK VP9, item no. 200521
Acro Adapter Plate for CZ P-10 C OR, item no. 200522
Acro Adapter Plate for Beretta APX, item no. 200524
Acro Adapter Plate for Sig Sauer P320/M17, item no. 200665
Acro Adapter Plate for S&W M&P, item no. 200523
Acro Adapter Plate for Walther QR Match, item no. 200578 -
Aimpoint® ACRO P-2™ FDE 3.5 MOA – Red Dot Reflex Sight
$750.00THE ACRO P-2 IN FLAT DARK EARTH.
Aimpoint® has once again advanced the standard for pistol mounted optics with the introduction of the Acro P-2™ red dot sight. This next generation sight incorporates an improved LED emitter coupled with a higher capacity CR2032 battery to provide an astonishing five years (50,000 hours) of constant-on power while getting you on target faster and more accurately. Designed to endure the physical forces generated by semi-automatic pistol slides, the ACRO™ series was the first pistol sight to offer a fully enclosed optical channel to protect the LED emitte. Built to exceed the requirements of professional users, the Acro P-2 has been tested and proven to withstand the extreme shock, vibration, temperatures, and material stresses generated by firing over 20,000 rounds of .40 S&W ammunition. The new high efficiency LED emitter provides a sharp 3.5 MOA dot. Protective clear glass front and rear lenses guard the advanced reflective lens system. The new digital intensity adjustment keypad provides a more distinct tactile feel when adjusting the dot intensity, and these controls are now placed next to the battery compartment to help protect the power adjustments against unintentional changes. In addition to use as a primary optic on handguns, the Acro P-2 can be mounted on carbines, shotguns and rifles or utilized as a backup sight on magnified scopes and thermal imagers. The sight can be mounted on a wide range of optics-ready handguns using adapter plates. It is night vision compatible, and the dot can also be turned up for use in bright sunlight. Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence. The matte finish of the Cerakote® may cause a patina on the housing in transit.
UNIQUE FEATURES
3.5 MOA red dot for precision and fast target acquisition
Battery life: 50,000 hours (over 5 years) of constant operation with one battery on setting 6
Battery type: CR2032 battery (battery included)
Battery can be quickly changed without removing optic
Variety of mounting options sold separately
Optimized for pistol and applications which require a low-profile red dot system
Fully enclosed housing protects all electronic components of the sight from all elements
Sealed optical channel protects the optic from rain, mud, sand, or snow
7075-T6 High-strength Aluminum Hard-anodized with Cerakoate H-Series Flat Dark Earth coating
10 brightness settings: 4 night vision compatible settings and 6 daylight settings
1X (non-magnifying) operationally parallax free optic
Submersible to 115 feet (35 meters)
Temperature span -49°F to +160°F
Weight 2.1 oz / 60 g (sight only)
Size 1.9” x 1.3” x 1.2” (L x W x H) -
Trijicon® SRO® Red Dot Sight 2.5 MOA Red Dot, Adjustable LED
Trijicon Specialized Reflex Optic (SRO™) 2.5 MOA Adjustable LED red dot, manual and automatic LED brightness modes, 3-year battery life, forged from 7075, T-6 aircraft grade aluminum
-
Glock 20 Gen5 Mos 10mm
Glock, 20 Gen 5 MOS, Striker Fired, Semi-automatic, Polymer Frame Pistol, Full Size, 10MM, 4.61″ Barrel, nDLC Finish, Black, Fixed Sights, Optics Ready, 15 Rounds, 3 Magazines, Comes with Glock OEM Adapter Plate 06 for Trijicon RMR Footprint
-
Trijicon® RMR® Type 2 Red Dot Sight 6.5 MOA Red Dot, Adjustable LED
Original price was: $779.00.$742.00Current price is: $742.00.Trijicon, Adjustable Ruggedized Miniature Reflex, Red Dot, Black, 6.5 MOA
-
Trijicon® RMR® Type 2 Red Dot Sight 3.25 MOA Red Dot, Automatic LED Illuminated, Cerakote Flat Dark Earth
EOTech Vudu 1-10x28mm FFP Tan SR4 Reticle (MOA) Riflescope VDU1-10FFSR4TAN
-
Trijicon® RMR® Type 2 Red Dot Sight 3.25 MOA Red Dot, Automatic LED Illuminated, Cerakote OD Green
$742.00AccuPoint® 1-6×24 Riflescope MOA-Dot Crosshair w/ Green Dot, 30mm Tube, Matte Black, Capped Adjusters
-
Trijicon® RMR® Type 2 Red Dot Sight 3.25 MOA Red Dot, Automatic LED Illuminated, Cerakote Sniper Gray
$742.00M18, 9MM, 3.9IN, X-SERIES, COYOTE, STRIKER, SIGLITE W/ ROMEOM17, POLYMER GRIP, (3) 21RD STEEL MAG
-
Sig Sauer SIG MCX SPEAR LT 9-INCH 300BLK BARREL AND GAS BLOCK ASSEMBLY
$739.99Genuine replacement barrel for the 9″ 300BLK SPEAR LT. Complete with barrel and gas block assembly.
*Please Note: All NFA rules apply to the installation of these upper assemblies to lower receivers and caliber exchange kits to upper receivers. Upper assemblies and caliber exchange kits with barrel lengths less than 16″ may only be affixed to lower receivers that (1) are not recorded as a rifle lower by the manufacturer and do not have a stock attached to the lower receiver or (2) registered with the BATFE as a short-barreled rifle (SBR). Please check with your local and state municipalities for any further regulatory requirements. It is your responsibility as the buyer of these components to make sure you comply with all NFA rules and applicable laws.
-
Sig Sauer ROMEO4 AND JULIET4 COMBO
$699.99The JULIET4 4x Magnifier is designed to work as a stand-alone magnification solution or in conjunction with reflex optics. This family of magnifiers is an excellent choice for transitioning from close quarters to intermediate ranged targets. In conjunction with a reflex optic, the JULIET4 can be adjusted for height through the use of spacers. It has a PowerCam 90° Mount so it can be quickly flipped to the side for more immediate, close quarters scenarios or deployed rapidly to bring targets four times closer. Its quick release mount comes with built-in recoil lugs for repeatable zero. The JULIET4 has a front and rear thread-in lens protector to keep it secure from the elements.
ROMEO4H FEATURES:
Designed for modern semi-automatic pistols, MSR platforms and shotguns
Comes standard with solid and see-through lens covers and quick release mount
Ballistic Circle-Dot and Ballistic Circle QuadPlex reticle options
Users can select from 4 different integrated reticle options (Dot, Circle-Dot, Dot with Holds, Circle-Dot with Holds)
50,000+ hour battery life and the readily available CR2032 battery is side loading for quick battery replacement.
Unlimited eye relief to acquire aiming point and target, regardless of eye position behind sight.
MOTAC (Motion Activated Illumination) powers up or down when sensing motion
Uses an ultra-efficient red LED illumination for daylight visibility and extended runtime
True co-witness QR mount and low mount included
Strong, lightweight aircraft-grade CNC aluminum housing
Waterproof, IPX-7 rated, and fog-proof.JULIET4 Features:
Aircraft grade CNC aluminum housing ensures a lifetime of reliable service.
IPX-8 rated for waterproofing — up to 20 meters for 1 hour
Dialectic coated prism
Compact size and weight
Objective thread-in lens cover and ocular slip-on, flip-back lens cover included
Backed by an Infinite Guarantee™ -
Sig Sauer BDX COMBO KIT, KILO1600 – SIERRA3 3.5-10x42mm
$699.99“Everything you need to get the most accurate and ethical shot every time.”
The BDX family of rangefinders includes: KILO1000BDX, KILO1400BDX, KILO1600BDX, KILO1800BDX, KILO2200BDX, KILO2400BDX, and KILO3000BDX rangefinder binocular. These rangefinders include many of the legacy features that the KILO name was built on: Lightwave DSP™ digital rangefinder engine, Hyperscan™ with 4 times per second scan rate, RangeLock™, and the Lumatic™ auto-adjusting display.
Available in 2.5-8x32mm, 3.5-10x42mm, 4.5-14x44mm, 4.5-14x50mm, and 6.5-20x52mm, the SIERRA3BDX riflescopes have the look, feel, weight, and size of traditional riflescopes. They feature HD glass for superior resolution and optical clarity, 30mm main tubes, side-focus parallax adjustments, and the LevelPlex™ digital anti-cant system. The BDX-R1 Digital Ballistic Reticle is the evolution of holdover, providing a ballistic solution out to 800 yards with 1 MOA of accuracy.
How does BDX work?
The BDX rangefinder and riflescope system is simple, fast, and intuitive. Simply download the “SIG BDX” app available for Android or iOS smartphones, pair the KILO BDX rangefinder and SIERRA3BDX riflescope, set up a basic ballistic profile, and then you’re ready to shoot or hunt. Once you are in the field, range your target as you normally would, and the KILO BDX rangefinder will utilize onboard Applied Ballistics Ultralight™ to instantly send your dope to the scope via Bluetooth. Using your basic ballistic profile the ballistic solution is calculated for your target and will instantly illuminate on the BDX-R1 Digital Ballistic Reticle with windage and elevation holds in the SIERRA3BDX riflescope. A blue LED on the riflescope power selector indicates that the BDX system is paired, and when the reticle has received new ballistic holdover and windage data from the rangefinder.
-
Sig Sauer P365-FUSE
$699.99Full-size capability and micro-compact concealment combine with the all-new FUSE from SIG SAUER. Its 21+1 capacity meets a razor-thin 1” wide grip module for unmatched versatility and shootability. FUSE delivers the accuracy and grit of a full-size pistol with its 6 7/8” optic-ready slide, longer than any compact in its class for improved sight radius and enhanced control. Equipped with a fiber optic front sight and a 4.3” barrel, FUSE provides improved ballistic performance from today’s defensive ammunition for faster velocities and maximum expansion on target.
All the benefits of a full-size pistol fused with the concealability of a compact. Built from the roots of the P365, a true crossover carry has arrived.
The Ultimate Fusion of Capability and Concealment. FUSE by SIG SAUER.(2) 21-Round (1) 17-Round Steel Magazines
Aggressive Serrated slide and optic ready
4.3” Carbon Steel Barrel With DLC Finish
Polymer LXG Grip Module With Laser Engraved Texture, 1913 Accessory Rail and
Removable Magwell
Interchangeable Small, Medium and Large Backstrap Included
Nickel-Plated Flat-Faced Trigger
Fiber-Optic Front Sight With Black Serrated Rear Sight
This firearm is not available with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
-
Eotech HWS EXPS2™
The HWS EXPS2™ maximizes rail space with its compact size and allows for co-witnessing of iron sights. It has convenient side buttons to add a magnifier and features an adjustable, locking, quick-detach lever for easy attachment and removal.
-
Trijicon® RMR®cc Red Dot Sight 6.5 MOA Red Dot, Adjustable LED
Trijicon, RMRcc (Concealed Carry), Micro Reflex Sight, 13mm Objective Lens, 6.5 MOA Red Dot, Black Color
-
Sig Sauer P320 RXP 9MM 4.7″ SLIDE ASSEMBLY, ROMEO1PRO, BLACK
$679.99This factory replacement, P320 RXP Stainless Steel slide assembly fits Full, Carry and Compact size (X & non-X) grip modules. It accommodates our 4.7” barrel.
This slide comes with our ROMEO1PRO mounted on top, ready for use.
Equipped with our suppressor height, XRAY3 night sights.Barrel Compatibility: 9MM
Finish: Black*Note, only for use on 9mm/ .357SIG / .40S&W fire control units (FCU). It will not function with a .45 ACP FCU.
-
Sig Sauer P320 RXP CARRY/COMPACT 9MM 3.9″ SLIDE ASSEMBLY, ROMEO1PRO, COYOTE BROWN
This factory replacement, P320 RXP Stainless Steel slide assembly fits Carry and Compact size (X & non-X) grip modules. It accommodates our 3.9” barrel.
This slide comes with our ROMEO1PRO mounted on top, ready for use.
Equipped with our suppressor height, XRAY3 Day/Night sights.Barrel Compatibility: 9MM
Finish: Coyote Brown*Note, only for use on 9mm/ .357SIG / .40S&W fire control units (FCU). It will not function with a .45 ACP FCU.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
