-
KAC MODULAR SELECTOR KIT, SERIES 2, SEMI AUTO
$303.20Includes multiple selector options. Choice of any combination of short/long, left/right side selectors. Semi-flush indicator that provides visual indication of the rifle’s firing mode only.
-
KAC URX 4 IBN Keymod Rail 5.56mm 14.5″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products. It is not suggested to use this rail with a 14.5″ or shorter barrel unless using a muzzle device such as the AAC flash hider which can be installed from the end with a tool.
-
KAC URX 4 IBN Keymod Rail 5.56mm 13.0″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
-
KAC SR-15/SR-16 Chrome Sand Cutter Bolt Carrier
Debris channels to allow movement and operation in adverse conditions. Hard chrome finish. Fits KAC SR-15/SR-16 and other AR-15 variants. Carrier Only.
-
KAC URX 4 IBN Keymod Rail 5.56mm 10.75″ Length
The KAC URX 4 Rail is a fully modular design that utilizes the revolutionary KeyMod accessory mounting system. The URX 4 Rail is stronger and more stable than previous URX designs due to its one piece construction. It is also lighter due to its Integral Barrel Nut (IBN) system of attachment. The IBN system allows the rail itself to act as the barrel nut when torqued onto the rifle, completely eliminating the need for a separate steel barrel nut. KeyMod accessories may be mounted anywhere along the URX 4s length, making it one of the most user configurable designs on the market. The URX 4 includes two QD sling swivel sockets, one on the left side and one on the right.
Specifications:
Length: 10.75″
Weight: 10.2 oz
Inside Diameter: 1.55″
Outside Diameter: 1.68″ (Side to Side)Each URX 4 Rail comes complete with an installation wrench, shim kit and instructions. Other lengths available include 8.5″, 10″, 13″, and 14.5″.
-
KAC URX 4 IBN Keymod Rail 5.56mm 10.0″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. URX 4 includes two QD sling swivel sockets at the rear of the rail. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products.
-
KAC MODULAR SELECTOR KIT, SERIES 2, FULL AUTO
$275.00Includes multiple selector options. Choice of any combination of short/long, left/right side selectors. Semi-flush indicator that provides visual indication of the rifle’s firing mode only.
-
KAC M4 Front Sight Black
$237.16Originally designed for the US military’s SOPMOD rifle enhancement program, the KAC M4 Folding Front Sight is a low-profile backup sighting solution that is designed to be attached to the top rail of a rifle’s handguard. When stowed in the folded position, the M4’s sight base extends back to envelope the front sight leaf on the right and left side, helping to protect it from damage.
-
KAC SUPPRESSOR SHROUD 7.62mm CRS FDE
$236.25A protective sleeve designed to fit over a firearm suppressor, primarily to shield the shooter from the intense heat generated during firing, preventing burns and reducing the visual distortion caused by heat waves (“mirage”) that can affect sight picture.
-
KAC SUPPRESSOR SHROUD 7.62mm CRS Black
$236.25A protective sleeve designed to fit over a firearm suppressor, primarily to shield the shooter from the intense heat generated during firing, preventing burns and reducing the visual distortion caused by heat waves (“mirage”) that can affect sight picture.
-
KAC 7.62mm QDC 3-Prong FH Kit
$229.43The KAC 7.62mm QDC Suppressor Compatible 3- Prong Flash Hider. Caliber Up to .30.
Specifications:
Weight: 4.9oz (139g)
Length: 2.8″ (70mm)
Thread Size: 3/4? x 24
-
KAC M4 Front Sight TAUPE
$225.31Originally designed for the US military’s SOPMOD rifle enhancement program, the KAC M4 Folding Front Sight is a low-profile backup sighting solution that is designed to be attached to the top rail of a rifle’s handguard. When stowed in the folded position, the M4’s sight base extends back to envelope the front sight leaf on the right and left side, helping to protect it from damage.
