The Geissele Super Select-Fire trigger. 2 Stage (Single Stage in Full Auto) 1st Stage Weight:2.5lbs. 2nd Stage Weight: 2.0lbs. Total Pull Weight: 4.5lbs. Full Auto Mode: 6.0lbs. Pull Weight (Single Stage) Adjustable: No Recommended Use: Law Enforcement, Military Pin Size: Mil-Spec All weights are approximates. The Geissele Super Select-Fire (SSF®) Trigger is a select-fire combat trigger that Geissele Automatics developed for the U.S. Special Operations Community.
The 7.62 QDC OPEN BRAKE KIT, 3/4″-24 TPI, developed for 7.62/6.5 platforms.
It accepts KACÂ’s QDC line of sound suppressors, includes 7 piece shim set and Rocksett Dose 3/4″-24 thread
Compatible with Knight’s Armament SR25, does not fit most .308 rifles which use 5/8″-24 thread.
GEISSELE AUTOMATICS, Reliability Enhanced Bolt Carrier Group, 5.56mm
Geissele Automatics, Super MPX SSA, M4 Curve Bow
Geissele Automatics, SSA-E X – Trigger
Geissele Automatics, SSA X – Trigger
(SCAR) Geissele Super Scar Trigger – 2 stage (1st Stage 2.5 lbs and 2nd Stage 1.5 lbs), Mil-Spec pin
Geissele Automatics, Super MCX SSA, M4 Curve Bow
Polymer lower for USW-320, Black With Stock Kit
(BT-430174-K)
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products. It is not suggested to use this rail with a 14.5″ or shorter barrel unless using a muzzle device such as the AAC flash hider which can be installed from the end with a tool.
Non-NFA device directs blast concussion away from areas left and right of shooter’s firing position
Precision-machined of rugged stainless steel, heat treated and coated with a durable Cerakote™ finish
SureFire SOCOM Fast-Attach® adapter mount provides fast, easy attachment and removal
Blast Forward. The SureFire Warden Blast Regulator for 5.56 and 7.62 mm weapons is engineered to direct the concussive blast of the fired round forward of the weapon system without venting gas to the side, as seen with standard muzzle brakes. This aids in reducing the overpressure felt by others immediately to the left and/or right of the shooter’s firing position. It also limits any dust signature from the weapon when fired from a prone position. This version of the Warden quickly and easily mounts to any SureFire SOCOM Fast-Attach® 5.56 or 7.62 muzzle device through the same patented system found on SureFire SOCOM Fast-Attach® Series suppressors. Unlike sound suppressors, Wardens are not NFA devices and are available wherever SureFire products are sold, without any of the restrictions associated with suppressors.
Non-NFA device directs blast concussion away from areas left and right of shooter’s firing position
Precision-machined of rugged stainless steel, heat treated and coated with a durable Cerakote™ finish
SureFire SOCOM Fast-Attach® adapter mount provides fast, easy attachment and removal
Blast Forward. The SureFire Warden Blast Regulator for 5.56 and 7.62 mm weapons is engineered to direct the concussive blast of the fired round forward of the weapon system without venting gas to the side, as seen with standard muzzle brakes. This aids in reducing the overpressure felt by others immediately to the left and/or right of the shooter’s firing position. It also limits any dust signature from the weapon when fired from a prone position. This version of the Warden quickly and easily mounts to any SureFire SOCOM Fast-Attach® 5.56 or 7.62 muzzle device through the same patented system found on SureFire SOCOM Fast-Attach® Series suppressors. Unlike sound suppressors, Wardens are not NFA devices and are available wherever SureFire products are sold, without any of the restrictions associated with suppressors.
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5”, 10”, 10.75″, 13”, and 14.5” lengths, and is equipped with KnightÂ’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, KnightÂ’s Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
The KAC URX 4 Rail is a fully modular design that utilizes the revolutionary KeyMod accessory mounting system. The URX 4 Rail is stronger and more stable than previous URX designs due to its one piece construction. It is also lighter due to its Integral Barrel Nut (IBN) system of attachment. The IBN system allows the rail itself to act as the barrel nut when torqued onto the rifle, completely eliminating the need for a separate steel barrel nut. KeyMod accessories may be mounted anywhere along the URX 4Â’s length, making it one of the most user configurable designs on the market. The URX 4 includes two QD sling swivel sockets, one on the left side and one on the right.
Specifications:
Length: 10.75″
Weight: 10.2 oz
Inside Diameter: 1.55″
Outside Diameter: 1.68″ (Side to Side)
Each URX 4 Rail comes complete with an installation wrench, shim kit and instructions. Other lengths available include 8.5″, 10″, 13″, and 14.5″.
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. URX 4 includes two QD sling swivel sockets at the rear of the rail. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products.
Debris channels to allow movement and operation in adverse conditions. Hard chrome finish. Fits KAC SR-15/SR-16 and other AR-15 variants. Carrier Only.