-
Aimpoint® ACRO P-2™ Sniper Grey 3.5 MOA – Red Dot Reflex Sight
$750.00Product Details
THE ACRO P-2 IN SNIPER GREY.Aimpoint® has once again advanced the standard for pistol mounted optics with the introduction of the Acro P-2™ red dot sight. Thisnext generation sight incorporates an improved LED emitter coupled with a higher capacity CR2032 battery to provide an astonishing five years (50,000 hours) of constant-on power while getting you on target faster and more accurately. Designed to endure the physical forces generated by semi-automatic pistol slides, the ACRO™ series was the first pistol sight to offer a fully enclosed optical channel to protect the LED emitte.Built to exceed the requirements of professional users, the Acro P-2 has been tested and proven to withstand the extreme shock, vibration, temperatures, and material stresses generated by firing over 20,000 rounds of .40 S&W ammunition. The new high efficiency LED emitter provides a sharp 3.5 MOA dot. Protective clear glass front and rear lenses guard the advanced reflective lens system. The new digital intensity adjustment keypad provides a more distinct tactile feel when adjusting the dot intensity, and these controls are now placed next to the battery compartment to help protect the power adjustments against unintentional changes. In addition to use as a primary optic on handguns, the Acro P-2 can be mounted on carbines, shotguns and rifles or utilized as a backup sight on magnified scopes and thermal imagers. The sight can be mounted on a wide range of optics-ready handguns using adapter plates. It is night vision compatible, and the dot can also be turned up for use in bright sunlight. Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence. The matte finish of the Cerakote® may cause a patina on the housing in transit.
UNIQUE FEATURES
3.5 MOA red dot for precision and fast target acquisition
Battery life: 50,000 hours (over 5 years) of constant operation with one battery on setting 6
Battery type: CR2032 battery (battery included)
Battery can be quickly changed without removing optic
Variety of mounting options sold separately
Optimized for pistol and applications which require a low-profile red dot system
Fully enclosed housing protects all electronic components of the sight from all elements
Sealed optical channel protects the optic from rain, mud, sand, or snow
7075-T6 High-strength Aluminum Hard-anodized with Cerakoate H-Series grey coating
10 brightness settings: 4 night vision compatible settings and 6 daylight settings
1X (non-magnifying) operationally parallax free optic
Submersible to 115 feet (35 meters)
Temperature span -49°F to +160°F
Weight 2.1 oz / 60 g (sight only)
Size 1.9” x 1.3” x 1.2” (L x W x H) -
Aimpoint® ACRO P-2™ FDE 3.5 MOA – Red Dot Reflex Sight
$750.00THE ACRO P-2 IN FLAT DARK EARTH.
Aimpoint® has once again advanced the standard for pistol mounted optics with the introduction of the Acro P-2™ red dot sight. This next generation sight incorporates an improved LED emitter coupled with a higher capacity CR2032 battery to provide an astonishing five years (50,000 hours) of constant-on power while getting you on target faster and more accurately. Designed to endure the physical forces generated by semi-automatic pistol slides, the ACRO™ series was the first pistol sight to offer a fully enclosed optical channel to protect the LED emitte. Built to exceed the requirements of professional users, the Acro P-2 has been tested and proven to withstand the extreme shock, vibration, temperatures, and material stresses generated by firing over 20,000 rounds of .40 S&W ammunition. The new high efficiency LED emitter provides a sharp 3.5 MOA dot. Protective clear glass front and rear lenses guard the advanced reflective lens system. The new digital intensity adjustment keypad provides a more distinct tactile feel when adjusting the dot intensity, and these controls are now placed next to the battery compartment to help protect the power adjustments against unintentional changes. In addition to use as a primary optic on handguns, the Acro P-2 can be mounted on carbines, shotguns and rifles or utilized as a backup sight on magnified scopes and thermal imagers. The sight can be mounted on a wide range of optics-ready handguns using adapter plates. It is night vision compatible, and the dot can also be turned up for use in bright sunlight. Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence. The matte finish of the Cerakote® may cause a patina on the housing in transit.
UNIQUE FEATURES
3.5 MOA red dot for precision and fast target acquisition
Battery life: 50,000 hours (over 5 years) of constant operation with one battery on setting 6
Battery type: CR2032 battery (battery included)
Battery can be quickly changed without removing optic
Variety of mounting options sold separately
Optimized for pistol and applications which require a low-profile red dot system
Fully enclosed housing protects all electronic components of the sight from all elements
Sealed optical channel protects the optic from rain, mud, sand, or snow
7075-T6 High-strength Aluminum Hard-anodized with Cerakoate H-Series Flat Dark Earth coating
10 brightness settings: 4 night vision compatible settings and 6 daylight settings
1X (non-magnifying) operationally parallax free optic
Submersible to 115 feet (35 meters)
Temperature span -49°F to +160°F
Weight 2.1 oz / 60 g (sight only)
Size 1.9” x 1.3” x 1.2” (L x W x H) -
Aimpoint® Patrol Rifle Optic (PRO™) Red Dot Reflex Sight – QRP2 Mount
$482.00Product Details
Aimpoint® Patrol Rifle Optic (PRO) was built to withstand the challenging conditions faced by law enforcement officers. The PRO™ has a 2 MOA red dot that allows for fast target acquisition. The hard anodized, high strength aluminum housing provides incredible protection against any physical abuse the sight may encounter. It is vibration and shock resistant and submersible up to 150 feet. The sight is powered by a single DL1/3N battery and ACET technology provides over 3 years of constant-on use at daylight position 7 and even longer on the night vision settings. The Aimpoint PRO comes with a spacer and QRP2 mount that attaches to MIL-STD-1913 picatinny rails without any additional tools.The optic has flip-up lens covers – the front is solid and the rear transparent – allowing the user to shoot with the lens caps closed and both eyes open in an emergency situation. The PRO sight is fully compatible with all generations of night vision devices and the Aimpoint 3XMag-1™ and 3X-C™ magnifiers. Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you.
Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence.
UNIQUE FEATURES
2 MOA red dot for precision and fast target acquisition
Battery life: 30,000 hours (over 3 years) of constant operation with one battery on setting 7
Battery type: DL1/3N battery (included)
QRP2 Mount and spacer – Integral Picatinny-style base allows easy attachment to any rail by snap/twisting knob three times Flip-up lens covers – front is solid, and rear is transparent – allowing the user to shoot with both eyes open and lens caps closed in an emergency situation
Front lens opening is threaded for addition of killFlash® anti-reflective device (ARD)
Retainer straps for adjustment caps
Hard anodized non-reflective surface 10 brightness settings: 4 night vision compatible settings and 6 daylight settings
1X (non-magnifying) operationally parallax free optic
Submersible to 150 feet (45 meters)
Temperature span -49°F to +160°F
Weight 7.8 oz / 220 g (sight only) -
Aimpoint® FlipMount (high) for Aimpoint 3X Magnifiers
$364.00The Aimpoint® FlipMount is a quick attach/detach mount that can be quickly flipped in or out of the optical axis. The FlipMount is designed primarily for use with Aimpoint magnifiers. Can also be used to mount other optical equipment with a 39mm tube. The FlipMount with TwistMount™ base is offered in two different heights to accommodate various sight mounts. Total height (art.nr 200251): 47.5 mm (1.9in) – for AR15/M4 Carbine. Length: 40 mm (1.6in). Width: 54.5 mm (2.1in). Weight (art.nr 200251): 129 grams (4.6 oz)
-
Aimpoint® LaRue Tactical LT-660 Mount for Micro® Series & CompM5™ Series
$154.00LaRue Tactical LT-660 mount is manufactured from aluminum bar-stock and given a matte black, anodized hard-coat to reduce reflection and increase durability.
-
Aimpoint® B&T QD mount “Skeleton” for Aimpoint ACRO-39mm
$150.00B&T QD mount “Skeleton” for Aimpoint ACRO-39mm
-
Aimpoint® B&T QD mount “Skeleton” for Aimpoint ACRO-39mm FDE
$150.00B&T QD mount “Skeleton” for Aimpoint ACRO-39mm
-
Aimpoint® TwistMount base only
$138.00Separate base for TwistMount™. To be used with the TwistMount Ring, FlipMount™ Ring and CEU™ Rings. Fits on Picatinny rail (MIL-STD 1913).
-
Aimpoint® ACRO® QD Mount 30mm
Quick Detachable Mount for Acro sights. Raises height of optical axis to 30 mm. Fits on Weaver and Picatinny rail.
-
Aimpoint® ACRO 45-Degree Angle B&T Picatinny Mount
$115.00This red dot mount is compatible with Aimpoint’s Acro red dot series and attaches to picatinny rails. This mount positions the Acro at a 45 degree angle on both the right and left side of a rail. This allows the user to use the Acro red dot as a back-up, close range sight in conjunction with a magnified optic.
-
Aimpoint® Micro® Series sights 34mm Scope Adaptor with Picatinny Rail (ECOS-O)
$97.00Micro Series Picatinny adapter ring for 34 mm tube. For mounting secondary sight or flashlight on magnifying scopes with 34 mm tube. Fits all Aimpoint® Acro and Micro series sight models. Screws and Allen key included.
-
Aimpoint® Micro™ Series sights 30mm Scope Adaptor with Picatinny Rail (SQFS)
$97.00Micro Series Picatinny adapter ring for 30 mm tube. For mounting secondary sight or flashlight on magnifying scopes with 30 mm tube. Fits all Aimpoint® Acro and Micro series sight models. Screws and Allen key included